Disconnect or Unpair from a Bluetooth Device, Send Information Using Bluetooth

Disconnect or Unpair from a Bluetooth Device

Follow these instructions to disconnect or unpair your tablet from a Bluetooth device.

Disconnect from a Bluetooth Device

1.Press and touch > Settings > Bluetooth.

2.Touch the Bluetooth ON/OFF slider to turn Bluetooth on.

3.Touch the connected device, and then touch OK to disconnect.

Unpair from a Bluetooth Device

You can make your tablet forget its pairing connection with another Bluetooth device. To connect to the other device again, you may need to enter or confirm a passcode again.

1.Press and touch > Settings > Bluetooth.

2.Touch the Bluetooth ON/OFF slider to turn Bluetooth on.

3.In the Bluetooth devices section, touch next to the device, and then touch Unpair.

Send Information Using Bluetooth

You can use Bluetooth to transfer information between your tablet and another Bluetooth- enabled device such as a tablet or notebook computer. The first time you transfer information between your tablet and another device, you need to enter or confirm a security passcode. After that, your tablet and the other device are paired, and you will not need to exchange passcodes to transfer information in the future.

You can send the following types of information, depending on the device you are sending to:

●Images and videos

●Calendar events

●Contacts

●Audio files

The location where the information is saved depends on the type of information and the receiving device.

1.Set the receiving device to discoverable mode. You may also need to set it to “Receive Beams” or “Receive Files”. Refer to the device’s documentation for instructions on receiving information over Bluetooth.

2.On the tablet, open the application that contains the information or file you want to send.

For example, if you want to send a photo, press and touch > Gallery.