Bluetooth, Connect to a Wi-FiNetwork, Add a New Network Connection

Tip: You can also turn Wi-Fi on and off through the Notification panel. Drag the Notification panel down and tap Wi-Fito enable or disable Wi-Fi.

Note: Most Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain closed wireless networks.

Connect to a Wi-Fi Network

1.Press and tap > Settings > Connections > Wi-Fi.

2.The network names and security settings (Open network or Secured with xxx) of detected Wi-Fi networks are displayed.

When you select an open network, you will be automatically connected to the network.

When you select a secured network, you will need to enter the wireless password to connect to the network. Enter the password and tap Connect. You can use the show password option to display the password as you enter it.

Add a New Network Connection

1.Press and tap > Settings > Connections > Wi-Fi.

2.Tap Add Wi-Fi network.

3.Enter the Network SSID. This is the name of your Wi-Fi network.

4.Tap the Security field and select a security option. This must match the current security setting on your target network.

5.Tap Connect to store the new information and connect to the Wi-Fi network.

Note: The next time your phone connects to a previously accessed or secured wireless network, you are not prompted to enter the wireless password again, unless you reset your phone back to its factory default settings.

Scan for a Wi-Fi Network

1.Press and tap > Settings > Connections > Wi-Fi.

2.Tap Scan.

Bluetooth

Use Bluetooth to share information with other devices, or to connect to other devices, such as headsets.