Scan for Wi-FiNetworks, Wi-Fi, Scan, Add Wi-FiNetwork, Network SSID, Password

To make sure you have an accurate list of Wi-Fi networks.

From a Home screen, touch Apps ➔ Settings

➔ Wi-Fi, and then touch Scan.

To open a dialog where you can add a Wi-Fi network by entering its Network SSID (the name it broadcasts), security type, and other properties:

1.From a Home screen, touch Apps ➔ Settings

➔ Wi-Fi, and then touch Add Wi-Fi network.

2.Use the keyboard to enter Network SSID.

3.Touch the Security field and then touch a security type.

Note: Depending on the Security protocol used by the WAP, additional network information may be required, such as

aPassword.

4.If necessary, touch Password and enter the password or hex key.

5.Touch Save.

Set up and manage wireless access points.

1.From a Home screen, touch Apps ➔ Settings

➔ Wi-Fi.

2.Touch Menu ➔ Advanced. The following options display:

• Network notification: Have your device alert you to new Wireless Access Points (WAPs). Touch Network notification to

turn notifications On or Off. When enabled, a check mark appears in the check box.

• Keep Wi-Fi on during sleep: Specify when to disconnect from Wi-Fi. Option are: Always, Only when plugged in, or Never.

• Wi-Fi timer: Specify the Starting time and the Ending time for Wi-Fi to be connected.

• MAC address: View your device’s MAC address, required when connecting to some secured networks (not configurable).

• IP address: View your device’s IP address.