Turning Your Device On and Off, Setting Up Your Device, Turning Your Device On

4.When charging is complete, unplug the Charging Head from the power outlet and remove the USB cable from the device.

Turning Your Device On and Off

Turning Your Device On

Press and hold the Power/Lock Key .

For more information, refer to “Unlocking the Device” on page 15.

Note: Your device’s internal antenna is located along the top back of the device. Do not block the antenna; doing so may affect signal quality and may cause the device to operate at a higher power level than is necessary. For more information, refer to “GPS Applications” on page 105.

Turning Your Device Off

1.Press and hold the Power/Lock Key .

2.At the prompt, touch Power off ➔ OK.

Setting Up Your Device

When you first turn on your device, you are asked to set up a few things. To do that, the following screens display. Some screens can be skipped (touch Skip) or re-displayed (touch Back). Some screens display depending on the options you choose.

Select Language

1.Touch the language field, scroll through the list, and touch the language you want your device to use, such as, English (United States).

2.Touch Next.

Wi-Fi

Make sure the Wi-Fi OFF / ON icon is set to ON and choose one of the following options:

Touch Add Wi-Fi network to enter a Network SSID that is not listed.

Touch Scan to make sure you have an accurate list of Wi-Fi networks.