USB Debugging
When enabled, allows debugging when the device is attached to a PC by a USB cable.
Note: This setting is used for development purposes.
1.From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Development.
2.Touch USB debugging to enable or disable the setting.When enabled, a check mark appears in the check box.Allow Mock Locations
This setting is used by developers when developing location- based applications.
Note: This setting is used for development purposes.
1.From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Development.
2.Touch Allow mock locations to enable or disable thesetting. When enabled, a check mark appears in the box.Samsung Apps
Using the Samsung Apps option, the device notifies you when there are new applications in Samsung Apps.
1.From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Samsung Apps.
2.For new application notification, touch On. Touch Off to disable new application notification.
3.To delete Samsung Apps’ locale data, touch Reset locale and then touch OK.Accounts and Sync
Set up and manage accounts, including your Google and Backup Assistant accounts.
General Sync Settings
Background Data
When enabled, all accounts can sync, send, and receive data at any time, in the background.
Important!: Disabling background data can extend battery life and lower data use. Some applications may still use the background data connection, even if this setting is disabled.
116