Scan for Wi-Fi Networks

To make sure you have an accurate list of Wi-Fi networks.

■From a Home screen, touch Apps ➔ Settings

➔ Wi-Fi, and then touch Scan.

Add Wi-Fi Network

To open a dialog where you can add a Wi-Fi network by entering its Network SSID (the name it broadcasts), security type, and other properties:

2.Use the keyboard to enter Network SSID.

3.Touch the Security field and then touch a security type.

Note: Depending on the Security protocol used by the WAP, additional network information may be required, such as

aPassword.

4.If necessary, touch Password and enter the password or hex key.

5.Touch Save.

Advanced Settings

Set up and manage wireless access points.

1.From a Home screen, touch Apps ➔ Settings

➔ Wi-Fi.

2.Touch Menu ➔ Advanced. The following options display:

• Network notification: Have your device alert you to new Wireless Access Points (WAPs). Touch Network notification to turn notifications On or Off. When enabled, a check mark appears in the check box.

• Keep Wi-Fi on during sleep: Specify when to disconnect from Wi-Fi. Option are: Always, Only when plugged in, or Never.

• MAC address: View your device’s MAC address, required when connecting to some secured networks (not configurable).

• IP address: View your device’s IP address.