Bluetooth Status Indicators, Reconnect to a Bluetooth Device

5.When you see the name of the target device displayed in the Available devices section, touch the name. Your tablet will attempt to pair with the target device.

• If requested, enter the passcode displayed on the target device.

6.The pairing and connection status is displayed below the target device in the Available devices section.

(Bluetooth connected) displays in the Status Bar.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth­ compatible devices.

Bluetooth Status Indicators

Reconnect to a Bluetooth Device

When you have paired your tablet with another device, you should be able to reconnect it automatically by turning on Bluetooth on your tablet.

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Bluetooth.

ON .

3.Make sure that the target device is discoverable so that your device can find it. Refer to the instructions that came with the target device to find out how to set it to discoverable mode.

4.Touch Scan. Your device will start to scan for Bluetooth devices within range.

5.When you see the name of the target device displayed in the Available devices section, touch the name. Your tablet will attempt to pair with the target device.

• If requested, enter the passcode displayed on the target device.

If you still cannot reconnect, try to disconnect or unpair from the target device, and then follow the instructions for “Pairing with a Bluetooth Device” on page 80.