Options During a Call
Your phone provides a number of control functions that you can use during a call.
Adjusting the Call Volume
During a call, to adjust the volume, use the Volume key on the left side of the phone.
�Press the Up end of the volume key to increase the volume level and press the Down end of the volume key to decrease the volume level.
– or –
Quickly add more volume to the incoming audio by touching the onscreen Extra volume button 
.
From a Home screen, you can also adjust the ringer volume using these same keys.
In-Call Options
During an active call there are several functions available by touching a corresponding onscreen button.
•Add call: Display the dialer so you can call another person.
•Keypad: Display the onscreen keypad, where you can enter number using DTMF (Dual Tone
•Speaker: Route the phone’s audio through either the speaker or through the earpiece.
–Touch Speaker to route the audio through the speaker. (You can adjust the speaker volume using the volume keys.) A green line will appear under the Speaker button.
–Touch Speaker again to use the phone’s earpiece (see “Using the Speakerphone During an Active Call” on page 78). The green line will disappear when Speaker is not activated.
•Mute/Unmute turn the onboard microphone either on or off.–Touch Mute during a call to mute the microphone. A green line will appear under the Mute button.
–Touch Mute again to unmute the microphone. The green line will disappear when Mute is not activated.
Call Functions | 76 |
