Configuring Camcorder Settings, Settings, Flash, Exposure value, Timer, Storage

To configure Camcorder settings:

�While in Camcorder mode, touch a settings shortcut or

touch Settings to configure the following Camcorder settings:

•Edit shortcuts: Customize your settings shortcuts. (For more information, refer to “Editing Camera Settings Shortcuts” on page 94.)

•Self-recording: Touch to switch to the front-facing camera lens and record a video of yourself.

•Flash: Choose a flash mode (Off or On).

•Recording mode: Set a recording mode. Options are: Normal and Limit for email, which limits the size of the video to 50 megabytes.

•Effects: Apply an effect to videos. Options are: No effect, Negative, Black and white, or Sepia.

•Exposure value: Use the slider to set the exposure value from -2.0 to +2.0.

•Timer: Set a timer for how long to wait before recording a

video. Options are: Off, 2 sec, 5 sec, and 10 sec.

•Resolution: Set a size for the video. Options are: 1280x720, 720x480, 640x480, or 320x240.

•White balance: Set the light source. Options are: Auto, Daylight, Cloudy, Incandescent, or Fluorescent.

•Outdoor visibility: Enhances screen readability in bright light.

•Guidelines: Enable or disable an on-screen grid to aid in video composition.

•Save as flipped: (Requires Self-recording set to On.) When set to On, this option lets you take and save a mirror-image photo.

•Video quality: Lets you set the image quality to: Superfine, Fine, or Normal.

•Storage: Set whether to store you videos on your device or on your memory card.

•Reset: Reset all Camera settings to the defaults. Touch OK.